Flux JUNIORFLUX F314 Seal-less Barrel Pump

Chemical Drum Pump & Corrosive Liquid Pump

Key Specifications
Max Flow Rate 56lpm
Max Head 8.5M
Max Temperature 60°C
Max Viscosity 250 cP
Solids 0mm
Size 1" to 1 1/4"
Datasheet
Download this file
Enquire now about this product

The Flux JUNIORFLUX F314 Series Barrel Pump is designed for the cost-effective transfer of small quantities of fluids from a drum or IBC. Suitable for various applications, this chemical barrel pump should be selected for particle-free liquids that do not crystallise such as acids, chemicals and light oils up to 250 CP. The F314 Flux barrel pump comes seal-less, meaning that fluids can be pumped that would otherwise damage a mechanical seal and result in leaking or wear. As a Flux pumps supplier, we recommend this electric drum pump be used only to transfer one liquid. In case you need an electric barrel pump for multiple liquids, you might need to consider the JUNIORFLUX F310 model with a mechanical seal.

The JUNIORFLUX electric drum pump for chemicals has a smaller tube diameter enabling it to access narrow-necked drums, meaning it is a perfect pumping solution for barrels and IBCs with narrow openings. Thanks to its lightweight construction, this chemical pump can be operated with one hand and removed from a drum with minimal force.

The F314 Flux drum pump is supplied with the FEM 3070 motor as standard, which has an IP24 protection class, 2 step speed adjustment, 55m cable with 2 pole connector. Available in both 110v and 230v 50/60Hz for long operation hours, the F314 electric drum pump for chemicals has a high operational safety due to the overload cut-out switch.

Features of the Juniorflux F314 Flux Drum Pump:

  • Cost effective, lightweight chemical barrel pump
  • Designed for moving smaller volumes of fluid from IBCs and drums
  • Can pump out of narrow-necked containers
  • Minimal force required to change drums
  • Shaft is lubricated by the pumped fluid
  • Mains connection allows lengthy operation
  • Safe use due to overload cut-out switch
  • Can be operated by a single hand
  • Hand nozzle easily accessible thanks to holding hook
  • Low storage space required
  • Popular as a cost effective chemical transfer pump
  • Chemical resistant ETFE impellers
  • Long-life PTFE bearings
  • 230v model tested to German VDE and GS
  • Also available as a Flux drum pump kit

FAQs

Put most simply, a barrel pump, is a pump connected to an immersion tube that sits within the drum with its motor located outside of the container. The pump draws up the fluid through its immersion tube and is then dispensed via a hose or pipe that is connected to its outlet.

Related Products