Marine Fuel Pumps
Discuss your marine fuel application with our pump experts today!
Marine fuel transfer pumps for MGO, HFO and LSFO
Marine fuel pumps are required on board vessels to load fuel oil onto the ship, transfer it from tank to tank once on board and feed it to the engine. Vessel engines and boilers are usually powered by marine gas oil (MGO), heavy fuel oil (HFO) or more recently LSFO (low sulphur fuel oil). We offer cost effective, marine type approved pumps for all of these fuel types.
A MGO pump, or marine gas oil pump in full, is usually a screw pump or gear pump thanks to their ability to handle lubricating fluids at high pressures. Emission regulations have seen vessels having to begin using low sulphur fuel; a cleaner but much thinner fluid. Vessels powered off LSFO, require slightly different models of marine fuel transfer pumps designed to specifically handle lower viscosity fuels than has been used traditionally - we have specific low sulphur screw pumps in our range.
products
- Max Flow Rate: 300M³H
- Max Head: 105M
- Max Temperature: 130°C
- Max Viscosity: 200 cP
- Solids: 10mm
- Size: DN32 to DN150
- Max Flow Rate: 75M³H
- Max Head: 50M
- Max Temperature: 80°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN25 to DN80
- Max Flow Rate: 500M³H
- Max Head: 100M
- Max Temperature: 120°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN32 to DN150
- Max Flow Rate: 700M³H
- Max Head: 100M
- Max Temperature: 190°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN32 to DN150
- Max Flow Rate: 2000M³H
- Max Head: 150M
- Max Temperature: 120°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN100 to DN250
- Max Flow Rate: 700M³H
- Max Head: 100M
- Max Temperature: 120°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN50 to DN250
- Max Flow Rate: 1500M³H
- Max Head: 130M
- Max Temperature: 130°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN50-250
- Max Flow Rate: 1500M³H
- Max Head: 130M
- Max Temperature: 120°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN50 to DN250
- Max Flow Rate: 6000M³H
- Max Head: 60M
- Max Temperature: 120°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN300 to DN400
- Max Flow Rate: 2000M³H
- Max Head: 190M
- Max Temperature: 120°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN150 to DN250
- Max Flow Rate: 300M³H
- Max Head: 105M
- Max Temperature: 130°C
- Max Viscosity: 200 cP
- Solids: 10mm
- Size: DN32 to DN150
- Max Flow Rate: 75M³H
- Max Head: 50M
- Max Temperature: 80°C
- Max Viscosity: 200 cP
- Solids: 0mm
- Size: DN25 to DN80